Model IGAT-90 In-Ground Automatic 90° Seat Turn Features -Independent Operation -Automatic 90 Degree Seat Turn -Powered by Water Pressure -Lifts up to 400 LBS. at 55 PSI while operating, which equals approximately 60 PSI static pressure when measured at the faucet or hose.* -Vertical Seat Travel - 42" -Installs in Deck Socket -Portable (Lift Out and Roll Away) -Can be Padlocked in Seat-Up Position   * Note that the pressure requirement for a faucet or hose connection is approximately 10% higher to achieve our rated load.

For those who can do a diagonal or front-pivot transfer, the Model IGAT-90 may be ideal. Access for transfer is best with small or no gutter. The seat rotates backward into water, and forward when exiting. The standard seat has two arms. Refer to the drawing, "REQUIRED DIMENSIONS FOR IGAT LIFT MODELS," for the dimensions we need for this model.

Static pressure (measured at faucet or hose with no water flowing) is affected by variables in the material, length, diameter, and rigidity of the water lines and hoses from the street to the lift, and by how many other faucets are open at the same time. Operating pressure requirment (measured while lifting) is not affected by these variables.

Sequential Photos of the Model IGAT-90

#1

#2

#3

#4

Dimensional Information Required for Aquatic Access IGAT-180 and IGAT-90 Pool Lifts

3. Answer the following questions to further describe your pool environment for our staff:

a. Is the deck flat or does it slope? __________________________________________

b. If the deck has a slope, how much of a slope is it? _____________________________

c. What is the pool deck's composition (wooden decks require a socket plate).__________

_____________________________________________________________________

d. Is the deck built on a solid foundation such as gravel over ground fill or is there a mechanical 

room or void underneath? _________________________________________________

If there is such a room, please describe it: ______________________________________

______________________________________________________________________

e. What is the composition of the pool's walls?___________________________________

f. Is there a vinyl liner in the pool? _____________________________________________

g. Is there an automatic pool cover? ___________________________________________

h. Will the lift be used in multiple locations? ______________________________________

i. Is this location on city water?_________ What is the approximate pressure? ___________

j. What is the weight of the person who will be using the lift? _________________________

Socket placement for the IGAT models is critical, and will be determined by our engineering team based on the dimensions of your pool. Generally the socket for the IGAT-180 and IGAT-90 needs to be placed at least 15" from the edge of the pool and at least 36" from the pool's corner or other obstacles to its rotation. SEE DRAWING OF IGAT SOCKET PLACEMENT. The IGAT-180AD socket needs be placed at least 18" from the edge of the pool and at least 36" from the pool's corner or any other obstacle to its rotation. SEE DETAILED DRAWING OF IGAT-180AD SOCKET PLACEMENT.

IG-AT90 POOL LIFT

IG-AT90 POOL LIFT Anchor: Standard Concrete Anchor $189. Wood Structure Anchor $223. Shipping: Standard Ground Free Three Day Air $228. Instant Internet Rebate: Redeem $50. Instant Rebate Now! Redeem $50. Rebate By Receiving A Check In US Mail Notes & Measurements:

World Wide Seating