Model IGAT-180AD In-Ground Above-Deck   -Meets or exceeds current recommendations and future requirements of the ADA. -Automatic 180º Seat Turn -Elevated Deck Clearance to allow for automatic pool covers or pool/spa combinations. -Powered by Water Pressure -- lifts up to 350 LB. at 55 PSI while lifting or approx. 60 PSI static faucet pressure. * -Vertical Seat Travel - 42" -Installs in Deck Socket (Socket Cover included) -Portable (Lift Out and Put Away) -Flip-Up Footrest Included -Can Be Padlocked in Seat-Up Position -Allows Independent Operation * Note that the pressure requirement for a faucet or hose connection is approx. 10% higher to achieve our rated load. Read information below for more detail.

Previously available as a custom design, the Model IGAT-180AD was designed to accomodate pools with automatic covers and some pool/spa combinations. This lift complies with the current recommendations and pending requirements of the Americans with Disabilities Act (ADA). It is user-operable, and its seat height is easily adjustable to accommodate various wheelchair heights. The 180° turn allows the greatest access from the deck for the user and any assistants. Side-to-side transfers are easy, the footrest flips up and the mounting arm is under the seat. This allows for unobstructed transfer. The seat rotates forward when entering the pool, and backward when exiting the water. The standard seat has a right arm only, but a flip-up outer arm is available. Just let us know your needs when ordering. We strive to make our lifts fit your needs. When you call to order, please let us know about your pool cover and/or adjacent spa. Refer to the drawing -- REQUIRED DIMENSIONS FOR IGAT180 and 90 LIFT MODELS for dimensions we need for this model, and to the Socket Placement for IGAT-180AD for information about socket placement for this unit.

*Static pressure (measured at faucet or hose with no water flowing) is affected by variables in the material, length, diameter, and rigidity of the water lines and hoses from the street to the lift, and by how many other faucets are open at the same time. Operating pressure requirement (measured while lifting) is not affected by these variables.

The Model IGAT-180-AD Spa/Pool Lift

IGAT-180AD Socket and Cover IGAT-180AD Socket in place

IGAT-180AD Trim Ring in Position Edging the Socket in Deck. Lift mounts in hole in center. IGAT -180AD Socket Cover in Place over Socket.

Before ordering, fill out the Required Dimensions for IGAT Pool Lifts and look over the Socket Placement for the Above Deck IGAT Information.

Socket Placement for the IGAT-180 AD Pool Lift

TheIGAT-180AD Pool Lift mounts in a socket set in concrete in the pool's deck. The centerline of the socket must be about 18" from the edge of the pool. Always be certain that the socket is straight, level and has its notch oriented toward the pool's edge. The centerline of the socket must also be at least 36" from the pool's corners or any other obstruction to the lift's rotation.

If you have any questions about the IGAT-180AD's socket placement, please call us at 800-325-5438 and ask to speak to one of our engineers.

Dimensional Information Required for Aquatic Access IGAT-180 and IGAT-90 Pool Lifts

3. Answer the following questions to further describe your pool environment for our staff:

a. Is the deck flat or does it slope? __________________________________________

b. If the deck has a slope, how much of a slope is it? _____________________________

c. What is the pool deck's composition (wooden decks require a socket plate).__________

_____________________________________________________________________

d. Is the deck built on a solid foundation such as gravel over ground fill or is there a mechanical 

room or void underneath? _________________________________________________

If there is such a room, please describe it: ______________________________________

______________________________________________________________________

e. What is the composition of the pool's walls?___________________________________

f. Is there a vinyl liner in the pool? _____________________________________________

g. Is there an automatic pool cover? ___________________________________________

h. Will the lift be used in multiple locations? ______________________________________

i. Is this location on city water?_________ What is the approximate pressure? ___________

j. What is the weight of the person who will be using the lift? _________________________

Socket placement for the IGAT models is critical, and will be determined by our engineering team based on the dimensions of your pool. Generally the socket for the IGAT-180 and IGAT-90 needs to be placed at least 15" from the edge of the pool and at least 36" from the pool's corner or other obstacles to its rotation. SEE DRAWING OF IGAT SOCKET PLACEMENT. The IGAT-180AD socket needs be placed at least 18" from the edge of the pool and at least 36" from the pool's corner or any other obstacle to its rotation. SEE DETAILED DRAWING OF IGAT-180AD SOCKET PLACEMENT.

IG-AT180-AD POOL LIFT

IG-AT180-AD POOL LIFT Anchor: Standard Concrete Anchor $189. Wood Structure Anchor $223. Shipping: Standard Ground Free Three Day Air $228. Instant Internet Rebate: Redeem $50. Instant Rebate Now! Redeem $50. Rebate By Receiving A Check In US Mail Notes & Measurements:

World Wide Seating