Frequently Asked Questions About the Model EP-255

1. How does the Model EP-255 differ from the Model EP-110?
    
   The Model EP-255 uses the same frame as the Model EP-105. The column is offset to the right of the transferee's legs. The Model EP-255 has a single knee pad for both legs - usually preferred by individuals whose legs spasm together. The Model EP-255 has an adjustment on the column that utilizes a crank and screw arrangement; simply turning the crank raises or lowers the column. This makes adjustment easy and fast. The Model EP-255 also uses a "high-tech wheel" with polymer-shroud construction.
    
2. My need is for a patient lift that will work with many patients. Is the Model EP-255 suitable?
    
   Yes - especially if the population of clients is adult size. The Model EP-255 adjusts quickly. It does not require moving a bolt to change column height - instead, you simply turn a crank.
    
3. Can we turn the crank to raise and lower patient while they are on the patient lift?
    
   This is not recommended - although it is sometimes done. The gear reduction crank is designed for light loads. If one does adjust the patient lift up or down with a client "on board," it should be done with caution - because the client's position on the patient lift is changing. If done, height adjustment with a client on the patient lift should only be done with a chair or bed behind the patient.
    
4. Does the optional adjustable elevating foot base attach to the patient lift?
    
   Two bolts hold the adjustable elevating foot base to the patient lift. Holes for these bolts are pre-drilled and attachment takes only a few minutes.
    
5. Tone causes my clients foot to occasionally moved from the foot base. How can this be prevented?
    
   See our accessories for heel loops, toe loops and other special items. Special foot plates can be provided at your request.
    
6. Can the two-piece (split chest pad) be added to the Model EP-255?
    
   A two-piece split chest pad may be added to the Model EP-255. It uses the same bolt pattern so this can be done in the field. The two-piece chest pad is designed to accommodate tracheotomy and ventilator tubing. The "slot" between the two chest pieces is a variable width.
    
7. Is the patient lift shipped assembled?
    
   All of our EasyPivot models are shipped assembled - but "knocked down." Assembly takes five minutes and requires only a wrench. Written instructions are provided.
    
8. Our patient has wide thighs. Is there a bigger knee pad available?
    
   There is a wide knee pad available for the Model EP-255. It does bolt to the same pattern as the standard one - so installation is quick. It is offset - so the extra knee pad width is in the direction opposite of the column.

Rand Scott EP-225